Vacon NX series Applications Manual page 298

VACON · 298
485 SCALING OF MOTORING TORQUE LIMIT 6 (2.2.6.5)
Table 148: Selections for parameter ID485
Selection
number
0 Not used
1 AI1
2 AI2
3 AI3
4 AI4
5 Fieldbus (FBProcessDataIN2)
Fig. 64: Scaling of motoring torque limit
486 DIGITAL OUTPUT 1 SIGNAL SELECTION * 6 (2.3.1.1)
Connect the delayed DO1 signal to the digital output of your choice with this parameter. For
more information about the TTF programming method, see Chapter 8.9 "Terminal to
function" (TTF) programming principle. Digital output function can be inverted by Control
options, parameter ID1084.
487 DIGITAL OUTPUT 1 ON-DELAY (2.3.1.3)
488 DIGITAL OUTPUT 1 OFF-DELAY 6 (2.3.1.4)
With these parameters you can set on- and off-delays to digital outputs.
8
Selection name
See Chapter 8.7 Fieldbus control parameters (IDs 850 to 859)
Torque
limit
100%
Par. ID349
0 Signal range
PARAMETER DESCRIPTIONS
Description
Free
analogue
input
TEL. +358 (0)201 2121 · FAX +358 (0)201 212 205