Vacon NX series Applications Manual page 163

MULTI-PURPOSE CONTROL APPLICATION
Table 66: Analogue output 1 (Control keypad: Menu M2 -> G2.3.5)
Index Parameter
Analogue output 1
P2.3.5.6
scale
Analogue output 1
P2.3.5.7
offset
* = Use TTF method to program these parameters.
Table 67: Analogue output 2 (Control keypad: Menu M2 -> G2.3.6)
Index Parameter
Analogue output 2
P2.3.6.1 *
signal selection
Analogue output 2
P2.3.6.2
function
Analogue output 2
P2.3.6.3
filter time
Analogue output 2
P2.3.6.4
inversion
Analogue output 2
P2.3.6.5
minimum
Analogue output 2
P2.3.6.6
scale
Analogue output 2
P2.3.6.7
offset
* = Use TTF method to program these parameters.
24-HOUR SUPPORT +358 (0)201 212 575 · EMAIL: VACON@VACON.COM
Min Max Unit
10 1000 %
-100.00 100.00 %
Min Max Unit
0.1 E.10
0 15
0.00 10.00 s
0 1
0 1
10 1000 %
-100.00 100.00 %
Default Cust ID
100 311
0.00 375
Default Cust ID
0.1 471
4 472
1.00 473
0 474
0 475
100 476
0.00 477
VACON · 163
Description
Description
TTF programming
method used. See
Chapter 8.9 "Ter-
minal to function"
(TTF) programming
principle.
See P2.3.5.2
0 = No filtering
0 = Not inverted
1 = Inverted
0 = 0 mA (0 V)
1 = 4 mA (2 V)
6