Vacon NX series Applications Manual page 131

MULTI-PURPOSE CONTROL APPLICATION
Table 44: Monitoring values, NXS drives
Index Monitoring value
V1.1 Output frequency
V1.2 Frequency reference
V1.3 Motor speed
V1.4 Motor current
V1.5 Motor torque
V1.6 Motor power
V1.7 Motor voltage
V1.8 DC link voltage
V1.9 Unit temperature
V1.10 Motor temperature
V1.11 Analogue input 1
V1.12 Analogue input 2
V1.13 DIN 1, 2, 3
V1.14 DIN 4, 5, 6
V1.15 Analogue output 1
V1.16 Analogue input 3
V1.17 Analogue input 4
V1.18 Torque reference
V1.19 Sensor max temp.
Multimonitoring
G1.20
items
V1.21.1 Current
V1.21.2 Torque
V1.21.3 DC Voltage
V1.21.4 Status Word
V1.21.5 Fault History
V1.21.6 Motor Current
24-HOUR SUPPORT +358 (0)201 212 575 · EMAIL: VACON@VACON.COM
Unit ID
Hz 1 The output frequency to motor
Hz 25 The frequency reference to motor control
rpm 2 The actual speed of the motor in rpm
A 3
% 4 The calculated shaft torque
% 5 The calculated motor shaft power in percentage
V 6 The output voltage to motor
V 7 The measured voltage in the DC-link of the drive
°C 8 The heatsink temperature in Celsius or Fahrenheit
The calculated motor temperature in percentage
% 9
of the nominal working temperature
V/mA 13 AI1
V/mA 14 AI2
15 Shows the status of the digital inputs 1-3
16 Shows the status of the digital inputs 4-6
V/mA 26 AO1
V/mA 27 AI3
V/mA 28 AI4
% 18
ºC 42 Highest measured temperature
Displays three selectable monitoring values
A 1113 Unfiltered motor current
% 1125 Unfiltered motor torque
V 44 Unfiltered DC link voltage
43 SeeTable 53 Appliction Status word content.
37 Last active fault code
A 45
VACON · 131
Description
6