Vacon NX series Applications Manual page 283

PARAMETER DESCRIPTIONS
The changeover is smooth when the reference of the destination source comes from the
Keypad or an internal motor potentiometer (parameter ID332 [PID Ref.] = 2 or 4, ID343 [I/O B
Ref] = 2 or 4, par. ID121 [Keypad Ref] = 2 or 4 and ID122 [Fieldbus Ref]= 2 or 4.
367 MOTOR POTENTIOMETER MEMORY RESET (FREQUENCY REFERENCE) 3567 (2.2.23, 2.2.28,
2.2.1.3, 2.2.1.16)
Table 141: Selections for parameter ID367
Selection
Selection name
number
0 No reset
Memory reset in stop and pow-
1
erdown
2 Memory reset in powerdown
370 MOTOR POTENTIOMETER MEMORY RESET (PID REFERENCE) 57 (2.2.29, 2.2.1.17)
Table 142: Selections for parameter ID370
Selection
Selection name
number
0 No reset
Memory reset in stop and pow-
1
erdown
2 Memory reset in powerdown
371 PID REFERENCE 2 (PLACE A ADDITIONAL REFERENCE) 7 (2.2.1.4)
If the PID reference 2 enable input function (ID330)= TRUE, this parameter defines which
reference place is selected as PID controller reference.
24-HOUR SUPPORT +358 (0)201 212 575 · EMAIL: VACON@VACON.COM
VACON · 283
Description
Description
8