Vacon NX series Applications Manual page 158

VACON · 158
Table 64: Digital ouput signals (Control keypad: Menu M2 -> G2.2.4)
Index
P2.3.3.1 *
P2.3.3.2 *
P2.3.3.3 *
P2.3.3.4 * Inverted fault
P2.3.3.5 *
P2.3.3.6 * External fault
P2.3.3.7 * Reference fault/warning
P2.3.3.8 * Overtemperature warning
P2.3.3.9 *
P2.3.3.10 * Unrequested direction
P2.3.3.11 *
P2.3.3.12 * Jogging speed
P2.3.3.13 * I/O control place
P2.3.3.14 * External brake control
External brake control,
P2.3.3.15 *
Output frequency limit 1
P2.3.3.16 *
Output frequency limit 2
P2.3.3.17 *
P2.3.3.18 * Reference limit supervision
Temperature limit supervi-
P2.3.3.19 *
P2.3.3.20 * Torque limit supervision
P2.3.3.21 * Themistor fault or warning
Analogue input supervision
P2.3.3.22 *
6
Parameter Min
Ready 0.1
Run 0.1
Fault 0.1
0.1
Warning 0.1
0.1
0.1
0.1
Reverse 0.1
0.1
At speed 0.1
0.1
0.1
0.1
0.1
inverted
0.1
supervision
0.1
supervision
0.1
0.1
sion
0.1
0.1
0.1
limit
MULTI-PURPOSE CONTROL APPLICATION
Default Cust ID
A.1 432 Ready to Run
B.1 433 Running
B.2 434 Drive in fault state
0.1 435 Drive not in fault state
0.1 436 Warning active
0.1 437 External fault active
0.1 438 4 mA fault or warning active
0.1 439 Drive overtemperature active
0.1 440 Output frequency < 0 Hz
Actual direction <> reques-
0.1 441
ted direction
Reference = Output fre-
0.1 442
quency
Jogging or preset speed
0.1 443
command active
0.1 444 IO control active
0.1 445 See IDs 445 and 446 in Chap-
ter 8 Parameter descriptions.
0.1 446
See ID315 in Chapter 8
0.1 447
Parameter descriptions.
See ID346 in Chapter 8
0.1 448
Parameter descriptions.
See ID350 in Chapter 8
0.1 449
Parameter descriptions.
Drive temperature supervi-
0.1 450 sion. See ID354 in Chapter 8
Parameter descriptions.
See ID348 in Chapter 8
0.1 451
Parameter descriptions.
0.1 452
See ID356 in Chapter 8
0.1 463
Parameter descriptions.
TEL. +358 (0)201 2121 · FAX +358 (0)201 212 205
Description