Vacon NX series Applications Manual page 220

VACON · 220
Table 94: Analogue output 1 (Control keypad: Menu M2 -> G2.3.3)
Index Parameter
Analogue output
P2.3.3.7
offset
* = Use TTF method to program these parameters.
Table 95: Analogue output 2 (Control keypad: Menu M2 -> G2.3.4)
Index Parameter
Analogue output 2
P2.3.6.1 *
signal selection
Analogue output 2
P2.3.6.2
function
Analogue output 2
P2.3.6.3
filter time
Analogue output 2
P2.3.6.4
inversion
Analogue output 2
P2.3.6.5
minimum
Analogue output 2
P2.3.6.6
scale
Analogue output 2
P2.3.6.7
offset
* = Use TTF method to program these parameters.
7
Min Max Unit
-100.00 100.00 %
Min Max Unit
0.1 E.10
0 14
0.00 10.00 s
0 1
0 1
10 1000 %
-100.00 100.00 %
PUMP AND FAN CONTROL APPLICATION
Default Cust ID
0.00 375
Default Cust ID
0.1 471
0 472
1.00 473
0 474
0 475
100 476
0.00 477
TEL. +358 (0)201 2121 · FAX +358 (0)201 212 205
Description
Description
TTF programming
method used. See
Chapter 8.9 "Ter-
minal to function"
(TTF) programming
principle.
See P2.3.3.2
0 = No filtering
0 = Not inverted
1 = Inverted
0 = 0 mA (0 V)
1 = 4 mA (2 V)