Vacon NX series Applications Manual page 188

VACON · 188
Table 80: Fieldbus parameters
Index Parameter
Fieldbus process
P2.9.10 data out 8 selec-
tion
NXP drives only (In NXS, default values are not editable)
Fieldbus process
P2.9.11
data in 1 selection
Fieldbus process
P2.9.12
data in 2 selection
Fieldbus process
P2.9.13
data in 3 selection
Fieldbus process
P2.9.14
data in 4 selection
Fieldbus process
P2.9.15
data in 5 selection
Fieldbus process
P2.9.16
data in 6 selection
6
Min Max Unit
0 10000
0 10000
0 10000
0 10000
0 10000
0 10000
0 10000
MULTI-PURPOSE CONTROL APPLICATION
Default Cust ID
37 859
1140 876
46 877
47 878
48 879
0 880
0 881
TEL. +358 (0)201 2121 · FAX +358 (0)201 212 205
Description
Make the selection
of the Process
Data Out with the
parameter ID.
The raw value of
process data in a
32-bit signed for-
mat. Choose con-
trolled data with
parameter ID Def:
FB Torque Refer-
ence.
The raw value of
process data in a
32-bit signed for-
mat. Choose con-
trolled data with
parameter ID Def:
FB Limit Scaling.
The raw value of
process data in a
32-bit signed for-
mat. Choose con-
trolled data with
parameter ID Def:
FB Adjust Refer-
ence.
The raw value of
process data in a
32-bit signed for-
mat. Choose con-
trolled data with
parameter ID Def:
FB Analogue Out-
put.
The raw value of
process data in a
32-bit signed for-
mat. Choose con-
trolled data with
parameter ID.
The raw value of
process data in a
32-bit signed for-
mat. Choose con-
trolled data with
parameter ID.