Vacon NX series Applications Manual page 277

PARAMETER DESCRIPTIONS
AI *)
ID358
ID357
1
RO1
0
Fig. 49: An example of On/Off-control
*) Selected with par. ID356
NOTE!
In this example the programming of par. ID463 = B.1
359 PID CONTROLLER MINIMUM LIMIT 5 (2.2.30)
360 PID CONTROLLER MAXIMUM LIMIT 5 (2.2.31)
With these parameters you can set the minimum and maximum limits for the PID controller
output.
Limit setting: –1600.0% (of f
These limits are of importance for example when you define the gain, I-time and Dtime for
the PID controller.
361 FREE ANALOGUE INPUT, SIGNAL SELECTION 34 (2.2.20, 2.2.17)
Selection of input signal of a free analogue input (an input not used for reference signal):
24-HOUR SUPPORT +358 (0)201 212 575 · EMAIL: VACON@VACON.COM
) < par. ID359 < par. ID360 < 1600.0% (of f
max
VACON · 277
t
).
max
8