Vacon NX series Applications Manual page 205

PUMP AND FAN CONTROL APPLICATION
Table 85: Basic parameters G2.1
Index Parameter
P2.1.16 Sleep delay
P2.1.17 Wake up level
P2.1.18 Wake up function
Jogging speed
P2.1.19
reference
* = Apply the Terminal to Function method (TTF) to these parameters (see Chapter 8.9
"Terminal to function" (TTF) programming principle).
24-HOUR SUPPORT +358 (0)201 212 575 · EMAIL: VACON@VACON.COM
Min Max Unit
0 3600 s
0.0 1000.0 %
0 3
0.00 P2.1.2 Hz
Default Cust ID
30 1017
25.0 1018
0 1019
10.00 124
VACON · 205
Description
The minimum
quantity of time
during which the
frequency has to
stay below the
sleep level before
the drive stops.
Gives the level for
the PID feedback
value wake-up
supervision. Uses
the set process
units.
0 = Wake-up at fall
below wake up
level (P2.1.17)
1 = Wake-up at
exceeded wake up
level (P2.1.17)
2 = Wake-up at fall
below wake up
level (P3.4/3.5)
3 = Wake-up at
exceeded wake up
level (P3.4/3.5)
7