Rs-232C Hdbaset Connection; Rs-232C Transmitting Channel; Rs-232C Receiving Channel - IDK MSD-6203 User Manual

MSD-62 Series User's Guide

9.12.3 RS-232C HDBaseT connection

Menu Top→COM PORT→FORWARDING
Setting for RS-232C channel
Setting value OFF [Default], ON
You can set the communication between MSD's RS-232C connector and RS-232C connectors of HDBaseT
transmitters or receivers that is connected to HDBaseT I/O connector.
If setting this menu to "ON", RS-232C communication data can be transmitted from a PC that is connected to
the RS-232C connector to HDBaseT transmitter (connected to the HDBaseT input connector) and receiver
(connected to RS-232C output connector).

9.12.4 RS-232C transmitting channel

Menu Top→COM PORT→FWD TX CH
Setting for OUT1B to OUT8B, IN5 to IN6)
Setting value OFF [Default], ON
You can select destination connectors to which RS-232C communication data is sent from a PC connected to
RS-232C.
This menu is available if "9.12.3 RS-232C HDBaseT connection" is set to "ON".

9.12.5 RS-232C receiving channel

Menu Top→COM PORT→FWD RX CH
Setting value OUT1B
You can select the source connector from which RS-232C communication data is sent to a PC (connected to
RS-232C.
112
[Default], OUT2B ～ OUT8B, IN5 ～ IN6