Table of Contents
Advertisement
9.16.2 Outputting bitmap image
Menu
Top→BITMAP→BITMAP OUTPUT
Setting for
Each output channel
Setting value OFF [Default] ON (BITMAP1 ON to BITMAP4 ON)
You can enable/disable the bitmap image output.
If multiple bitmaps are registered, select the bitmap number you want to output.
9.16.3 Background color
Menu
Top→BITMAP→BACKGROUND COLOR
Setting for
Each output channel, each bitmap
Setting value R / G / B:0 to 255 [Default] R / G / B: 255 (white)
You can set the background color of the bitmap.
If you set "LINK" to "ON", you can set only Red (R). Settings of Green (G) and Blue (B) are also changed
according to the setting of the Red (R).
If more than one bitmap is registered to the MSD, you can confirm the bitmap number at left of the second line
on the front VFD screen.
9.16.4 Aspect ratio
Menu
Top→BITMAP→ASPECT
Setting for
Each output channel, each bitmap
Setting value [Fig. 9.31] Setting aspect ratio
Bitmap (1024x768)
You can set the aspect ratio of bitmap.
If you select "AUTO", the aspect ratio is kept. However, if bitmap is larger than output resolution, only a
portion of the bitmap is displayed.
●AUTO [Default]
(1920x1080)
[Fig. 9.31] Setting aspect ratio
●FULL
(1920x1080)
MSD-62 Series User's Guide
●THROUGH
(1920x1080)
137
Advertisement
Table of Contents
