Output Connector; Hdcp Output - IDK MSD-6203 User Manual

9.9.8 Output connector

Menu Top→OUTPUT SETTING→OUTPUT CONNECTOR
Setting for Each output channel
Setting value HDMI [Default], HDBaseT
The MSD outputs video to the HDMI output or HDBaseT output. You can set a desired connector.

9.9.9 HDCP output

Menu Top→OUTPUT SETTING→HDCP OUTPUT MODE
Setting for Each output channel
Setting value ALWAYS
HDCP INPUT ONLY : Encrypts HDPC only if input signal has HDCP
DISABLE
You can set the HDCP encryption of the HDMI output connector.
Normally set this function to "ALWAYS".
If you select "HDCP INPUT ONLY", the MSD encrypts HDCP only if the input signal has HDCP. However, if
input channel is changed to others and HDCP authentication status is changed, the MSD starts HDCP
authentication again. This action may take time to output video and audio.
If you select "DISABLE", the MSD never encrypts HDCP. Only the input signal which does not have HDCP
can be output.
If a sink device which does not support HDCP is connected, the MSD can output only the video and audio
which do not have HDCP regardless of this menu's setting.
: Encrypts HDCP at all times regardless of input signal status [Default]
: Do not encrypt HDCP
MSD-62 Series User's Guide
93