MSD-62 Series User's Guide
#
Feature
⑦
HDMI output connectors
⑧
HDBaseT output
connectors
⑨
Audio output connector
⑩
RS-232C connector
⑪
LAN connector
⑫
Contact closures
⑬
Dante connectors
(Optional)
⑭
Maintenance port
⑮
Power supply connector
⑯
Frame ground
18
[Table 5.3] Rear panel features (Cont'd)
Output connectors for HDMI and DVI signal, interfaces with sink devices
such as LC monitors and projectors.
Output connector for HDBaseT signal
Connects to a receiver over a twisted pair cable.
Analog audio output connectors interface to amplifiers, speakers, and
mixers.
Connector type is 5-pin terminal block.
For external control by communication commands
Connector type is 3-pin terminal block.
For external control by communication commands or web browsers
For external device control by dry contact closure
Connector type is 6-pin terminal block.
Output connector for Dante audio
Input digital and analog audio signals are converted into Dante format.
Factory use only
For use with provided power cable.
Use for bonding chassis to local ground. An M3 screw is used.
Description
【See: 9.9.8 Output connector】
【See: 7.2.3 Twisted pair cable for extension】
【See: 9.9.8 Output connector】
【See: 9.9.17 HDBaseT output long reach mode】
【See: 7.2.4 Connecting audio cable】
【See: 7.2.5 Connecting RS-232C】
【See: 7.2.6 Contact closure】
【See: 8.8 Dante output (Optional)】