5.2
Rear panel
⑧
②
③
#
Feature
①
Main POWER switch
②
HDMI input connectors
③
HDMI cable fixing holes
④
DVI input connectors
⑤
HDBaseT input
connectors
⑥
Audio input connectors
⑦
⑤
[Fig. 5.2] Rear panel drawing (MSD-6208 with Dante)
[Table 5.2] Rear panel features
Controls the main power of the MSD.
Input connectors for HDMI and DVI signals to interface source devices,
such as Blu-ray players.
Retain HDMI cables by inserting cable clamps.
Interfaces with DVI-I or DVI-D cable.
The following video signals can be input.
・DVI
・HDMI
・Analog RGB (such as PC)
・Analog YPbPr (SDTV / HDTV)
・Composite video (NTSC / PAL)
・S-video (NTSC / PAL)
Input connector for HDBaseT signal
Connects to a transmitter over a twisted pair cable.
Provides power to HDBaseT transmitter that supports PoH.
Input connectors (5-pin terminal block) for analog audio signal.
⑪
⑩
⑬
⑭
④
Description
【See: 8.1 Main power switch and standby key】
【See: [Fig. 7.2] How to use cable clamp】
【See: 7.2.2 DVI-I input connector】
【See: 7.2.3 Twisted pair cable for extension】
【See: 9.7.6 HDBaseT input long reach mode】
【See: 7.2.4 Connecting audio cable】
MSD-62 Series User's Guide
⑫
①
⑥
⑨
⑯
⑮
17