MSD-62 Series User's Guide
9.15 Preset memory
You can set the cross point memory, preset memory, and start-up memory.
9.15.1 Recalling cross point
Menu
Top→PRESET MEMORY→LOAD CROSS POINT
Setting value No.1 to No.9
You can recall the I/O channel settings saved in the cross point memory. You can also recall settings by
pressing control command execution keys (COMMAND A to COMMAND I).
Press the MENU/SET key to apply the setting.
9.15.2 Saving cross point
Menu
Top→PRESET MEMORY→SAVE CROSS POINT
Setting for
NONE
Setting value No.1 to No.9
You can save the I/O channel settings of video and audio into the cross point memory.
Up to 9 cross point memories can be saved with their name (up to 10 characters). If you set "---" (not control)
for "9.15.3 Editing cross point", a writing method (CONTINUE or DELETE) can be selected.
Press the MENU/SET key to apply the setting.
■ For writing
"CONTINUE": the setting ("---") will be kept in the cross point memory.
"DELETE": the current input channel settings will be overwritten.
Current input channel setting
OUT1 = Input channel 1
OUT2 = Input channel 2
Current cross point memory1
OUT1 = Input channel 3
OUT2 =
Not control
130
"CONTINUE"
[Default]
"DELETE"
[Fig. 9.28] Saving cross point
【See: 9.15.2 Saving cross point】
"---" (not control) will be kept.
OUT1 = Input channel1
OUT2 =
Not control
Input channel settings will be
overwritten.
OUT1 = Input channel1
OUT2 = Input channel2