Table of Contents
Advertisement
Item
HDMI / DVI
Video
HDBaseT
Format
Output
Digital
Audio
Analog
Network audio
(Option)
Digital Input
Maximum
extension distance
Digital output
Analog video
processing unit
Scan Converter
Functions
Others
RS-232C
LAN
External control
Contact closure
External control
Power
Power consumption
Dimensions
General
Weight
Temperature
Humidity
*1
30 bit / pixel (10 bit / component) Deep Color is supported while x.v.Color, 3D, ARC and HEC are not supported.
WQHD, WQXGA and 4K format: 24 bit / pixel (8 bit / component) is supported.
*2
HDBaseT input/output: DVI signals protected by HDCP are not supported. To transmit those signals, use an IDK's twisted pair cable extender supporting DVI signals.
*3
For PoH power feeding, please use an HDBaseT transmitter supporting IEEE 802.3af. Use an AWG24 twisted pair cable or thicker cable.
*4
RJ-45 (HDBaseT connector) is only for extending digital video and audio signals over a Cat5e / Cat6 twisted pair cable. Use it with IDK's twisted pair cable transmitter or receiver.
Do not use for LAN devices.
*5
T568A or T568B straight. The CAT.5E HDC cable is developed by IDK and recommended by HDBaseT alliance.
*6
4K format: Up to 4K@30 is supported.
If multiple sink devices are connected, the actual number of outputs becomes three: OUT1 and OUT2 (as one group), OUT3 and OUT4 (as another group), and OUT5 to OUT6
(as the other group).
*7
RJ-45 (Dante connector) is only for outputting audio at the Dante format.
*8
The maximum cable distance varies depending on the connected devices and was measured under following conditions:
・1080p@60: when IDK's AWG 24 cable was used and signals of 1080p@60 24 bit / pixel (8 bit / component) was input or output.
・4K@30: when IDK's AWG 24 cable was used and signals of 4K@30 24 bit / pixel (8 bit / component) was input or output.
The maximum cable distance depends on the connected devices. The distance may not be extended with some device combinations, cabling method, or other manufacturer's
cable. Video may be disturbed or may not be output even if signals are within the range mentioned above.
*9
The maximum extension distance was obtained when IDK's CAT.5E HDC cable was used. The distance may not be extended with some device combinations, cabling method, or
other manufacturer's cable. Video may be disturbed or may not be output even if signals are within the range mentioned above. Operations may not be stable with some LCD
devices; please check the operation beforehand or contact us.
The maximum extension distance is the shorter distance of connected HDBaseT product or sink device's maximum extension distance.
Up to 492 ft. (150 m): 1080p (24 bit) in Long reach mode. For Long reach mode, use IDK's twisted pair cable products that supports 328 ft. (100 m).
*10 Seamless switching with a black frame.
*11 If multiple sink devices are connected, the actual number of outputs becomes two: OUT1 to OUT4 (as a group) and OUT5 to OUT8 (as another group).
*12 4K format is not supported.
*13 The anti-snow feature automatically fixes snow noise that is a specific symptom of HDCP-compliant signals and mainly occurs at start-up. This feature does not work when snow
noise has already occurred during startup or when it occurs due to a bad condition of the transmission line.
8 outputs
*The output video is switch-selectable between HDMI output and HDBaseT output.
HDMI Deep Color (*1) / DVI 1.0
TMDS single link, HDCP 1.4
TMDS clocks: 25 MHz to 300 MHz, TMDS data rate: 0.75 Gbps to 9 Gbps
Built-in cable EQ
Connector: Female HDMI Type A (19-pin)
8 outputs
*The output video is switch-selectable between HDMI output and HDBaseT output.
HDMI Deep Color (*1) / DVI 1.0
HDCP 1.4 (*2)
TMDS clocks: 25 MHz to 300 MHz, TMDS data rate: 0.75 Gbps to 9 Gbps
Connector: RJ-45 (*4)
Cable: CAT.5E HDC, Cat5e UTP / STP, Cat6 UTP / STP cable (*5)
VGA / WXGA (1280x768) / WXGA (1280x800) / Quad-VGA / SXGA / WXGA (1360x768) /
WXGA (1366x768) / SXGA+ / WXGA+ / WXGA++ / UXGA / WSXGA+ / VESAHD / WUXGA /
QWXGA
* For VESAHD / WUXGA / QWXGA, only Reduced Blanking is supported.
720p / 1080i / 1080p / 4K (3840 x 2160) (*6) / 4K (4096 x 2160) (*6)
8 outputs
*The output audio is switch-selectable between HDMI output and HDBaseT output.
Multi-channel linear PCM up to 8 channels
Sampling frequency: 32 kHz to 192 kHz, Sample size: 16 bit to 24 bit
Reference level: -20 dBFS, Max. output level: 0 dBFS
Connector: 8 female HDMI Type A (19-pin), 8 RJ-45 (*4)
1 output
1 of 8 digital audio outputs can be selected to be output as analog audio.
Stereo LR balanced / unbalanced
Output impedance: 100 Ω balanced / 50 Ω unbalanced
Reference level: -10 dBu, Max. output level: +10 dBu
Connector: 5-pin terminal block
1 output
Format: Dante protocol
Sampling frequency: 48 kHz, Sample size: 24 bit
The number of outputs: 64 channels
Connector: 2 RJ-45 (Primary / Secondary) (*7)
HDMI / DVI: 98 ft. (30 m) (1080p@60), 66 ft. (20 m) (4K@30) (*8)
HDBaseT: up to 328 ft. (100 m), up to 492 ft. (150 m) (Long reach mode) (*9)
HDMI / DVI: 131 ft. (40 m) (1080p@60), 98 ft. (30 m) (4K@30) (*8)
HDBaseT: up to 328 ft. (100 m), up to 492 ft. (150 m) (Long reach mode) (*9)
3D Y/C separation
Motion adaptive I/P conversion, Aspect Ratio Control, Picture adjustment (brightness, contrast,
display position, display size, etc.), Seamless Switching (*10)
Multiview function (*11), Horizontal flip (*12), All function setting through browser,
Automatic input detection and switching, Volume adjustment (volumes of input and output ports can
be set separately), Lip Sync (Max. 16 frames),
Audio breakaway enables independent audio and video switching, Cross-point memory (9 settings),
Preset memory (12 settings and startup settings), Last memory, Anti-Snow (*13), Connection Reset
(*14), External control commands (32 commands), Security lock
1 port / 3-pin terminal block
1 port / RJ-45 10Base-T / 100Base-TX (Auto Negotiation), Auto MDI / MDI-X
9 ports / 6-pin terminal block Non-voltage contact input up to DC 24 V 500 mA
RS-232C, LAN, contact closure, PJLink (class1), CEC (Power control of sink device) (*15)
100 - 240 VAC ± 10%, 50 Hz / 60 Hz ± 3 Hz
About 160 Watts
About 167 Watts with Dante (optional)
16.9 (W) × 3.5 (H) × 15.7 (D)" (430 (W) × 88 (H) × 400 (D) mm)
(EIA 2U high, full rack wide) (Excluding connectors and the like)
15.9 lbs. (7.2 kg)
16.5 lbs. (7.5 kg) with Dante (optional)
Operating: 32°F to 104°F (0°C to +40°C)
Storage: -4°F to +176°F (-20°C to +80°C)
Operating / Storage: 20% to 90% (Non Condensing)
MSD-62 Series User's Guide
Description
169
Advertisement
Table of Contents
