9.17 Startup setting
9.17.1 Power state
Menu
Top→POWER ON SETTING→POWER SWITCH
Setting value AUTO [Default], OFF, ON
You can set the standby switch state for when the main POWER switch on the rear panel is turned on.
[Table 9.43] Standby switch state for when main POWER switch is turned on
Setting value
AUTO
OFF
ON
Note:
"[Table 9.43]" is applied also when the power state is changed by the external power supplier.
Condition
Power state before main
POWER switch is powered off
Standby
Powered on
Standby
Powered on
Standby
Powered on
MSD-62 Series User's Guide
【See: 8.1 Main power switch and standby key】
Status
Power state after main POWER
switch is powered on
Standby
Powered on
Standby
Powered on
143