9.3
Operation from front panel
You can set the operation mode: Channel switching mode and control command execution key.
9.3.1 Channel switching mode
Menu
Top→FRONT OPERATION→SWITCHING MODE
Setting value V&A [Default], VIDEO, AUDIO
Video and audio signals can be switched simultaneously or separately. Select a switching mode in this menu
first and then switch the desired signals by pressing the front keys.
You can check the input and output setting status in the VFD screen.
9.3.2 Control command key operation
Menu
Top→→FRONT OPERATION→COMMAND/PRESET
Setting value COMMAND, PRESET LOAD, LOCKED [Default]
You can select the operation of the control command execution key.
COMMAND: Running control command
PRESET LOAD: Running cross point memory
LOCKED: Disables control command key
[Table 9.2] Channel switching mode
Mode
Signals to be switched
V&A
Video and audio simultaneously
VIDEO
AUDIO
Only video
Only audio
MSD-62 Series User's Guide
65