Restore The Factory Settings (Without Safety Functions) - Siemens SINAMICS G120C Operating Instructions Manual

Commissioning
5.6 Restoring the factory setting
5.6.2

Restore the factory settings (without safety functions)

Resetting to factory settings with Startdrive
Procedure
1. Go online.
2. Select "Commissioning".
3. Select "Back up/reset".
4. Select "All parameters will be reset".
5. Press the "Start" button.
6. Wait until the converter has been reset to the factory settings.
You have reset the converter to the factory settings.
❒
Resetting to factory setting with the BOP-2 operator panel
Procedure
1. Select "Reset to factory settings"
2. Start the reset.
3. Wait until the converter has been reset to the factory setting.
You have reset the converter to the factory settings.
❒
156
Operating Instructions, 02/2023, FW V4.7 SP14, A5E34263257B AK
SINAMICS G120C Converters