Welch Allyn Connex Vital Signs Monitor 6000 Series Service Manual page 89
Hide thumbs
Also See for Connex Vital Signs Monitor 6000 Series:
- Service manual (131 pages) ,
- Directions for use manual (143 pages) ,
- Service manual (185 pages)
Table of Contents
Advertisement
Service manual
•
Plug the ground cable from the IEC connector onto the ground plate in the position
closest to the IEC connector.
•
Ensure that the green ground wires are routed over the blue and brown wires.
•
Ensure that the grommet on the AC power harness is in the slot in the power supply
cover.
•
When replacing the power supply cover, ensure that the antenna cable is routed in
the channel located at the top of the rear housing.
•
Ensure that the green ground wires are underneath the power-supply cover, as
shown in the next figure.
Section A 83
Hide quick links:
Advertisement
Table of Contents
