Welch Allyn Connex Vital Signs Monitor 6000 Series Service Manual page 290

284 Appendices
Material no. Description
Nellcor SpO2 configuration testing
N/A
DOC-10
Masimo SpO2 configuration testing
N/A
SureTemp Plus configuration testing
06138-000
01802-110
Braun ThermoScan PRO 4000 / PRO 6000 configuration testing
01802-110
Braun ThermoScan PRO 6000 configuration testing
411690
Masimo RRa configuration testing
N/A
CO2 configuration testing
N/A
Notes:
• All items marked "N/A" in the Material no. column are OEM or off-the-shelf tools and equipment not available from
Welch Allyn. The remaining items are available through Welch Allyn or a Welch Allyn distributor.
• All items marked in the Full column are required for full functional verification checks and calibration. The Welch
Allyn Service Tool software and an active Gold license is also required to perform these checks. The Gold license is
obtained upon successful completion of Welch Allyn Technical Service Training.
• All items marked in the Basic column are required for basic functional verification checks. The Welch Allyn Service
Tool software Standard unlicensed edition can be used to perform the NIBP checks and software upgrades/
updates.
Miscellaneous Tools
• #1 Phillips bit
• #2 Phillips bit
• #10 Torx bit
• 5/16-inch socket
• Torque driver calibrated for 6.0 in-lb ±1.0 inch-pound
Nellcor SpO2 simulator (SRC-MAX)
Nellcor SpO2 extension cable
Masimo SpO2 simulator
Cal-key, assembly, M690/692
Tester, calibration, 9600 Plus
Tester, calibration, 9600 Plus
Braun PRO 6000 calibration fixture
Masimo RRa simulator
CO2 Calibration Kit (T46530RF-2BD)
®
Welch Allyn Connex Vital Signs Monitor 6000 Series™
Qty
1
1
1
1
3
3
3
1
1
Usage
Full Basic
X X
X X
X X
X X
X
X
X X
X
X X