®
128 Section B
Welch Allyn Connex
Vital Signs Monitor 6000 Series™
a. The Ethernet cable from J9.
b. The small USB connector from J4.
c. The large USB connector from J8.
d. The communications power cable from J50.
8. Continuing to support the rear housing, do the following at the power-supply cover:
a. Free the power supply and fan cable from the wire guide on the side of the
power-supply cover.
b. Disconnect the power supply cable from the power supply board at J2.
c. Disconnect the fan cable (A) from the main harness.
d. Disconnect the LCD ground wire from the IEC power harness.