Welch Allyn Connex Vital Signs Monitor 6000 Series Service Manual page 272

266 Appendices
Settings
Enable manual override Temperature Default
Enable manual override RR Default
Enable manual override SpO2 Default
1
You can enable only four manual parameters.
2
If a temperature module is available, manual temperature selection is not available.
Device
Settings
Temporarily pause patient monitoring
Display brightness
Allow display lock timeout
Profiles
Advanced
Language
Date/time
Date format
Time zone
Automatically adjust clock for daylight saving time, reported by host
Allow users to change date and time
Display date and time
Display
Display lock
Display power saver
Device power down
Device
Enable save as default
Standby Mode timeout
Welch Allyn Connex
1
®
Vital Signs Monitor 6000 Series™
Default value
Enabled
Enabled
Enabled
Default value
10 minutes
6
Enabled
Intervals Monitoring
English
mm/dd/yyyy
UTC
Disabled
Enabled
Enabled
Never
2 minutes
20 minutes
Enabled
10 minutes