Welch Allyn Connex Vital Signs Monitor 6000 Series Service Manual page 80

74 Section A
4. Carefully remove the door from the rear housing.
When replacing the communications door
1. Insert a spring and two pins into the communications door as shown.
2. With the bottom of the door on the antistatic mat, insert the pin on the right side of
the door into the hinge of the rear housing.
WARNING Personal injury risk. Because attaching the door might propel
the pin and spring into the air, wear safety glasses to complete these
steps.
®
Welch Allyn Connex Vital Signs Monitor 6000 Series™