Welch Allyn Connex Vital Signs Monitor 6000 Series Service Manual page 122

116 Section A
9. Place the HSG clamp on the bottom of the temperature module and secure with two
screws.
10. Connect the USB cable to the module as described in the instructions for replacing
the temperature module.
Remove the main board
This section includes instructions for 1st generation and 2nd generation displays. Follow
the instructions that apply to your configuration.
Note
Note
Note
Configuration A - 1st generation displays
42
No.
42
46
47
If you are replacing this board, you must have the service tool, Gold
licensed edition, to re-enter the serial number of the monitor and the main
board.
If you are replacing the display, you must replace the bezel, LCD with
touchscreen, and foam pads with the replacement parts in Service kit
106546. The bezel and foam pads are designed to match the display.
Different configurations of parts appear in Connex VSM monitors,
depending on the age of the display. Use Configuration A or Configuration
B to identify the components in your device.
48
49
50
Item
Front housing
Main board
Screw, M3 x 5 pan head
®
Welch Allyn Connex Vital Signs Monitor 6000 Series™
51
62 63 64
46
47
65
66
No. Item
51 Foam pad, bottom (and bottom in 2nd
generation models)
62 LCD frame
63 Grommet, ear - G411-1
8x