Welch Allyn Connex Vital Signs Monitor 6000 Series Service Manual page 193

Service manual
Material no.
N/A
N/A
4500-925
6000-30
N/A
web download
N/A
N/A
4500-30
620216
N/A
Full functional verification check and calibration tools
The list of tools below is what is required to perform a full device functionality check and
calibration. The tools are used in conjunction with the Welch Allyn service tool, Gold
licensed edition, to perform a device calibration.
Material no.
01802-110
407672
411690
N/A
DOC-10
Description
Pressure meter (must include at least one decimal point and
be accurate to within ±0.5 mmHg)
Nellcor SpO2 simulator (SRC-MAX)
USB 2.0/5-pin Mini-B cable, gold, 6 ft.
Single tube blood pressure hose, 5 ft.
PC running Windows XP SP3, Windows 7, or Windows 8
Welch Allyn Service Tool
Click this link.
CO2 Calibration Kit (T46530RF-2BD)
Blood pressure Y-tube
Blood pressure hose, 5 ft.
Fitting "Y" 1/8 X 1/8 X 1/8
ECG patient simulator calibrated to ISO/IEC standards with
defined amplitudes for Lead I, Lead II, Lead III, and Lead IV
when using a 5-lead patient cable -OR- an ECG patient
simulator with defined amplitudes for Lead I, Lead II, and
Lead III when using a 3-lead patient cable.
Description
Tester, calibration, 9600 Plus
BP test volume repair fixture 113670
PRO 6000 calibration fixture*
*Use with older models have a dust cover screw that rises
above the O-ring washer. Newer models have a dust cover
screw that is recessed into the washer.
Masimo Rainbow SET tester (Masimo part number 2368)
Cable, SpO2 extension, Nellcor
Functional verification and calibration 187
Qty Component
1 NIBP
1 Nellcor SpO2
1 NIBP, Software
updates
1 NIBP
1 ALL
1 NIBP, Software
updates and
calibration
1 CO2
1 NIBP
1 NIBP
1 NIBP
1 ECG
Qty Component
3 Braun ear and
SureTemp
Thermometry Probe
1 NIBP
3 Braun ear
1 Masimo SPO2
1 Nellcor SPO2