Mitsubishi Electric FR-A820-00046 Instruction Manual page 1022

Ethernet communication (FR-A800-E)
● List of I/O devices whose function is changed according to the parameter settings and the control
method
Pr. 544 setting
—
—
—
—
0, 1, 12
14, 18, 24, 28
0, 1, 12
14, 18
24, 28
24, 28
Tab. 5-408: I/O devices with function change
Pr. 804 ="3 or 5" must be set.
Pr. 810 = "2" must be set.
RYE is disabled.
Torque control cannot be performed with a PM motor.
5 - 820
V/F control /
I/O device Advanced magnetic flux
vector control
Frequency setting
RYD
command (RAM)
Frequency setting
RYE
command (RAM, EEPROM)
Frequency setting
RXD
completion (RAM)
Frequency setting
RXE
completion (RAM, EEPROM)
RWw1 Set frequency
RWwC —
RWwD to
—
RWwF
Real sensorless vector control / vector control /
PM sensorless vector control
Speed control / position
Torque control
control
Frequency setting / torque
Torque command (RAM)
limit command (RAM)
Frequency setting / torque
Torque command
limit command
(RAM, EEPROM)
(RAM, EEPROM)
Frequency setting / torque Torque command
limit completion (RAM) completion (RAM)
Frequency setting / torque
Torque command
limit completion (RAM,
completion (RAM, EEPROM)
EEPROM)
Torque command
Set frequency
—
— —
Torque limit Torque command
Torque limit (1st quadrant)
Torque command
Torque limit (2nd quadrant
—
to 4th quadrant)
Parameters