Faults History Clearing Procedure - Mitsubishi Electric FR-A820-00046 Instruction Manual

Check and clear of the faults history
6.3.2

Faults history clearing procedure

NOTE Set Err.CL Fault history clear = "1" to clear the faults history.
Turning ON the power of the inverter
The monitor display turns ON.
Parameter setting mode
Press
Selecting the parameter number
Turn
Press
Faults history clear
Turn
"
Turn
Press
Press
Tab. 6-3:
6 - 4
to choose the parameter setting mode. (The parameter number read previously appears.)
until " " (faults history clear) appears.
to read the present set value. "
to change the set value to "
" and " " flicker alternately after parameters are cleared.
to read another parameter.
to show the setting again.
twice to show the next parameter.
Clearing the faults history
Operation
" (initial value) appears.
". Press to start clear.
Protective functions