Mitsubishi Electric FR-A820-00046 Instruction Manual page 1026

Ethernet communication (FR-A800-E)
Programming example for reading the inverter status
The following program turns ON the signal Y00 of the output unit when the station 1 inverter starts
running.
SM1536 SD1536.0 SD1540.0
(0)
M0 X1002
(4)
(7)
Station 1
Fig. 5-393: Programming example 1
These signals are initial values. Output signals can be changed using Pr. 190 to Pr. 196, Pr. 313 to
Pr. 315 (output terminal function selection).
5 - 824
X 1 0 0
Remote input
b15
RXF to RX0
0
to
RX1F RX10
Inverter status
b0: During forward rotation
b1: Reverse rotation
b2: Running (RUN)
b3: Up to frequency (SU)
b4: Overload alarm (OL)
b5: Instantaneous power failure (IPF)
b6: Frequency detection (FU)
b7: Fault (ABC1)
b8: — (ABC2)
b16: — (DO0)
b17: — (DO1)
b18: — (DO2)
M0
Y30
END
F
b14 b13 b12 b11 b10 b9 b8 b7 b6 b5 b4 b3 b2 b1 b0
0 0 0 0 0 0 0 0
[Inverter status]
Check the data link status of the station 1
Turn ON the signal Y00 of the output unit
X 1 0 0 0
0 0 0 0 0 0 0
Parameters
I003128E, I003129E