Backup / Restoration - Mitsubishi Electric FR-A820-00046 Instruction Manual

Parameters
5.24

Backup / restoration

● The GOT can be used for backing up inverter parameters and the data used in the PLC function
of inverter.
● The backup data stored in the GOT can be used to restore the data in the inverter.
GOT2000
Fig. 5-403:
Connected devices
● To enable backup/restoration, connect either the general-purpose inverter with the FR-A8NCE or
the FR-A800-GF inverter to a programmable controller (master station) via the CC-Link IE Field
Network.
NOTES The backup/restoration is enabled only when the inverter is connected to a master station pro-
grammable controller.
For the details of the connected devices, refer to the GOT2000 Series User's Manual (Monitor).
Data to be backed up and restored
● The following data can be backed up and restored:
– Inverter parameters
– Parameters used for activating the PLC function
– Programs (including SFCs) used in the PLC function
– Global device comment information used in the PLC function
– Function block source information
FR-A800
Ethernet
Restoration
Backup / restoration using a GOT2000
CC-Link IE Field Network
Backup
MELSEC iQ-R
FR-A800 (with the FR-A8NCE installed)
FR-A800-GF
Backup / restoration
I003099E
5 - 837