Parameters - Mitsubishi Electric FR-A820-00046 Instruction Manual

Parameters

5 Parameters
The following marks are used to indicate the controls as below. (Parameters without any mark are
valid for all control.)
Magnetic flux Magnetic flux Magnetic flux
Sensorless Sensorless Sensorless
Vector Vector Vector
The setting range and the initial value of parameters differ depending on the structure or functions of
the inverter. The following common designations are used for each type of the inverter models.
Inverter model
FR-A8 0
FR-A8 2
FR-A8 6
FR-A8
FR-A8
Tab. 5-1:
NOTES The model with the symbol GF is not available in Europe. You can get the same functionality of
this model by installing the option FR-A8NCE (Art. no. 273102).
Upon delivery the FR-A800-E inverter models are not equipped with the RS-485 terminal block.
FR-A800
Mark Control method
V/F control
V/F V/F V/F
Advanced magnetic flux vector control
Real sensorless vector control
Vector control
PM sensorless vector control
PM PM PM
Common designation
Standard model
Separated converter type
IP55 compatible model
-GF Model with built-in CC-Link IE Field Network communication function (see note)
-E Model with built-in Ethernet board (FR-A8ETH)
Designation of the inverter model
Applied motor
Three-phase induction motor
Three-phase induction motor, PM motor
PM motor
5 - 1