List Of Parameters Classified By Purpose Of Use - Mitsubishi Electric FR-S500E Instruction Manual

2.2 List of parameters classified by purpose of use

Set the parameters according to the operating conditions. The following list indicates
purpose of use and corresponding parameters.
Purpose of Use
Use of extended function parameters
Operation mode selection
Acceleration/deceleration time/pattern
adjustment
Selection of output characteristics
optimum for load characteristics
Output frequency restriction (limit)
Operation over 50Hz
Adjustment of frequency setting signals
and outputs
Motor output torque adjustment
Brake operation adjustment
Multi-speed operation
Jog operation
Frequency jump operation
Automatic restart operation after
instantaneous power failure
Slip compensation setting
Setting of output characteristics matching
the motor
Electromagnetic brake operation timing
Sub-motor operation
Operation in communication with
personal computer
Operation under PID control
Noise reduction

List of parameters classified by purpose of use

Parameter Numbers
Parameter numbers which must be set
Pr. 30
Pr. 53, Pr. 79
(Communication parameters n10, n17)
Pr. 7, Pr. 8, Pr. 16, Pr. 20, Pr. 29, Pr. 44, Pr. 45
Pr. 3, Pr. 14, Pr. 19, Pr. 44, Pr. 45
Pr. 1, Pr. 2
Pr. 1, Pr. 38, Pr. 39,
calibration parameter C4, C7
Pr. 38, Pr. 39, Pr. 73,
calibration parameter C2 to C7
Pr. 0, Pr. 98
Pr. 10, Pr. 11, Pr. 12
Pr. 1, Pr. 2, Pr. 4, Pr. 5, Pr. 6, Pr. 24, Pr. 25, Pr.
26, Pr. 27, Pr. 80, Pr. 81, Pr. 82, Pr. 83, Pr. 84,
Pr. 85, Pr. 86, Pr. 87
Pr. 15, Pr. 16
Pr. 31, Pr. 32, Pr. 33, Pr. 34, Pr. 35, Pr. 36
Pr. 57, Pr. 58, additional parameter H6
Pr. 95 to Pr. 97
Pr. 3, Pr. 19, Pr. 71
Pr. 42, Pr. 64, Pr. 65
Pr. 0, Pr. 3, Pr. 7, Pr. 8, Pr. 44, Pr. 45,
Pr. 46, Pr. 47, additional parameter H7
Communication parameters n1 to n12
Pr. 60 to Pr. 65, Pr. 73, Pr. 79, Pr. 88
to Pr. 94
Pr. 70, Pr. 72
59
2