Mitsubishi Electric FR-A820-00046 Instruction Manual page 428

(E) Environment setting parameters
Registering a parameter in a user group (Pr. 173)
● To register Pr. 3 in a user group
Power ON
Make sure the motor is stopped.
Changing the operation mode
Press
Parameter setting mode
Press
Selecting the parameter number
Turn
Selecting the parameter number
Press
Parameter registration
Turn
To continue adding parameters, repeat steps
Tab. 5-88:
Clearing a parameter from a user group (Pr. 174)
● To delete Pr. 3 from a user group
Power ON
Make sure the motor is stopped.
Changing the operation mode
Press
Parameter setting mode
Press
Selecting the parameter number
Turn
Selecting the parameter number
Press
Clearing the parameter
Turn
To continue deleting parameters, repeat steps
Tab. 5-89:
5 - 226
to choose the PU operation mode. [PU] indicator is lit.
to select the parameter setting mode. (The parameter number read previously appears.)
until (Pr. 173) appears.
to display " ".
until (Pr. 3) appears. Press
and flicker alternately.
When registering Pr. 3 to user group
to choose the PU operation mode. [PU] indicator is lit.
to select the parameter setting mode. (The parameter number read previously appears.)
until (Pr. 174) appears.
to display " ".
until (Pr. 3) appears. Press
and flicker alternately.
When deleting Pr. 3 from user group
Operation
to register the parameter.
and .
Operation
to delete the parameter.
and .
Parameters