Mitsubishi Electric FR-A820-00046 Instruction Manual page 41

Installation and wiring
Reinstallation of the front covers
(FR-A820-01870(37K) or higher, FR-A840-00930(37K) or higher)
Insert the upper hooks of the front cover (upper side), into the sockets of the inverter.
Securely install the front cover (upper side), to the inverter by fixing the hooks on the sides of the
cover into place.
Tighten the mounting screw(s) at the lower part of the front cover (upper side),.
Fasten the front cover (lower side) with the mounting screws.
Fig. 2-10:
NOTE Fully make sure that the front covers are installed securely. Always tighten the mounting screws of
the front covers.
FR-A800
Removal and reinstallation of the operation panel or the front covers
Reinstallation of the front covers
Fasten
Fasten
I002351E
2 - 11