Setting Dial Potentiometer Mode/Key Lock Operation Selection - Mitsubishi Electric FR-A820-00046 Instruction Manual

(E) Environment setting parameters
5.7.8

Setting dial potentiometer mode/key lock operation selection

The setting dial of the operation panel (FR-DU08) can be used for setting like a potentiometer. The key
operation of the operation panel can be disabled.
Pr.
161
E200
Using the setting dial like a potentiometer to set the frequency
The frequency can be set by simply turning the setting dial of the operation panel (FR-DU08) during
operation.
The SET key needs not to be pressed. (For the details of the operation method, refer to page 4-15.)
NOTES If the display changes from flickering "60.00" to "0.00", the setting value of Pr. 161 may not be "1".
The newly-set frequency will be saved as the set frequency in EEPROM after 10 s.
When setting the frequency by turning the setting dial, the frequency goes up to the set value of
Pr. 1 "Maximum frequency" (initial value: 200 Hz). Be aware of what frequency Pr. 1 is set to, and
adjust the setting of Pr. 1 according to the application.
5 - 206
Name
Frequency setting/key lock
operation selection
Initial Setting
Description
value range
Setting dial frequency
0
setting mode
Setting dial
1
potentiometer mode
0
Setting dial frequency
10
setting mode
Setting dial
11
potentiometer mode
Parameters
Key lock mode disabled
Key lock mode enabled