Mitsubishi Electric FR-A820-00046 Instruction Manual page 96

Control circuit
The ON/OFF state of the output signal is the one for the positive logic. The ON and OFF are reversed
for the negative logic.
For SAFE signal, refer to the following table and assign the function by Pr. 190 to Pr. 196 (output
terminal function selection).
The use of the SAFE signal has not been certified for compliance with safety standards.
For more details, refer to the Safety Stop Function Instruction Manual.
(Find a PDF copy of this manual in the CD-ROM enclosed with the product.
2 - 66
Output signal
Positive logic
SAFE
Pr.190 to Pr.196 settings
Negative logic
80 180
Installation and wiring