User's Manual
3.
Click the link of the navigation path corresponding to the required found parameter to
open the page on which the parameter appears.
6.1.8
Creating a Login Welcome Message
You can create a personalized welcome message that is displayed on the Web Login
page, as shown in the example below:
Figure 6-15: User-Defined Web Welcome Message after Login
To create a login welcome message:
1.
Save the device's ini Configuration file to a folder on your PC (see 'Backing Up and
Loading Configuration File' on page 811).
2.
Open the file, and then configure the welcome message using the WelcomeMessage
table ini file parameter, as shown in the example below:
[WelcomeMessage ]
FORMAT WelcomeMessage_Index = WelcomeMessage_Text;
WelcomeMessage 1 = "*********************************";
WelcomeMessage 2 = "** This is a Welcome message! **";
WelcomeMessage 3 = "*********************************";
[\WelcomeMessage]
3.
Save the file, and then load it to the device.
To remove the welcome message, load the ini file without the parameter.
6.1.9
Getting Help
The Web interface provides you with context-sensitive pop-up help of standalone
parameters. When you hover your mouse over a parameter's field, a pop-up appears with a
short description of the parameter, as shown in the following example:
Figure 6-16: Viewing Context-Sensitive Help for a Parameter
Version 7.2
63
Mediant 800B Gateway & E-SBC
6. Web-Based Management