Creating A Login Welcome Message - AudioCodes Mediant 800B User Manual

6.1.9

Creating a Login Welcome Message

You can create a Welcome message box that is displayed on the Web Login page. The
figure below displays an example of a Welcome message:
Figure 6-15: User-Defined Web Welcome Message after Login
To enable and create a Welcome message, use the WelcomeMessage table ini file
parameter, as described in the table below. If the parameter is not configured, no Welcome
message is displayed.
Table 6-7: ini File Parameter for Welcome Login Message
Parameter
[WelcomeMessage]
User's Manual
Enables and defines a Welcome message that appears on the Web Login
page for logging in to the Web interface.
The format of the ini file table parameter is:
[WelcomeMessage]
FORMAT WelcomeMessage_Index = WelcomeMessage_Text;
[\WelcomeMessage]
For Example:
[WelcomeMessage ]
FORMAT WelcomeMessage_Index = WelcomeMessage_Text;
WelcomeMessage 1 = "*********************************";
WelcomeMessage 2 = "********* This is a Welcome message **";
WelcomeMessage 3 = "*********************************";
[\WelcomeMessage]
Each index row represents a line of text in the Welcome message box. Up
to 20 lines (or rows) of text can be defined.
62
Mediant 800B Gateway and E- SBC
Description
Document #: LTRT-10296