Configuring Gateway User Information Table From A Loadable File - AudioCodes E-SBC User Manual

CHAPTER 20 SIP Definitions
password (0aGzoKfh5uI=)
status (not-resgistered)
■ To view a specific entry (example):
(sip-def-proxy-and-reg)# user-info gw-user-info <index, e.g., 0>
(gw-user-info-0)# display
pbx-ext (405)
global-phone-num (405)
display-name (Ext405)
username (user405)
password (0aGzoKfh5uI=)
status (not-resgistered)
■ To search a user by pbx-ext:
(sip-def-proxy-and-reg)# user-info find <pbx-ext e.g., 405>
405: Found at index 0 in GW user info table, not registered
To configure the User Information table, make sure that you have enabled the feature
(see

Configuring Gateway User Information Table from a Loadable File

You can configure users in a file and then load (import) it to the User Information table. The users
must be configured in comma-separated value (CSV) file format. You can create the file using any
standard text- based editor such as Notepad, or alternatively a CSV-based program such as
Microsoft Excel. The file can have any filename extension (e.g., .csv or .txt).
When you import a file, all previously configured entries in the table are deleted and
replaced with the users from the imported file.
When adding users to the file, use the following syntax:
■ For text-based editors:
PBXExtension,GlobalPhoneNumber,DisplayName,Username,Password
For example:
PBXExtension,GlobalPhoneNumber,DisplayName,Username,Password
4040,7362400,John,johnd,2798
4041,7362401,Sue,suep,1234
■ For CSV-based programs:
PBXExtension,GlobalPhoneNumber,DisplayName,Username,Password
For example:
Enabling the User Info Table).
Mediant 1000 Gateway & E-SBC | User's Manual
- 476 -