Class Type Queuing (Policy Map Type Queuing) - Cisco Nexus 7000 Series Command Reference Manual

Cisco Nexus 7000 Series NX-OS Quality of Service Commands
S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - d o c f e e d b a c k @ c i s c o . c o m .

class type queuing (policy map type queuing)

To add a reference to an existing queuing class map in a policy map and enter the class mode, use the
class type queuing command. To remove a class from the policy map, use the no form of this command.
class-map-name
Syntax Descriptionn
Defaults None
Command Modes
policy map type queuing configuration
Supported User Roles network-admin
vdc-admin
Command History Release
4.0
Usage Guidelines Policy actions in the first class that matches the traffic type are performed.
This command does not require a license.
Examples
This example shows how to add a reference to a class map at the end of a type queuing policy map:
switch(config)# policy-map type queuing my_policy1
switch(config-pmap-que)# class type queuing 8q2t-in-q4
switch(config-pmap-c-que)#
This example shows how to add a reference to a class map before an existing class map reference in a
type queuing policy map:
switch(config)# policy-map type queuing my_policy1
switch(config-pmap-que)# class type queuing 8q2t-in-q4 insert-before type queuing
8q2t-in-q2
switch(config-pmap-c-que)#
This example shows how to remove a class map reference in a type queuing policy map:
switch(config)# policy-map type queuing my_policy1
switch(config-pmap-que)# no class type queuing 8q2t-in-q4
switch(config-pmap-que)#
OL-23378-01
class type queuing class-map-name
no class type queuing class-map-name
Reference to a system-defined class map. For a list of the system-defined
type queuing class maps, see
Modification
This command was introduced.
Cisco Nexus 7000 Series NX-OS Quality of Service Command Reference, Release 5.x
class type queuing (policy map type queuing)
Table 1.
QOS-9