Electrical Connections (Hull Side); (Dbw Model) - TOHATSU BFT 200D Rigging Manual

dummyhead
BF175D/BF200D/BF225D/BF250D
ELECTRICAL CONNECTIONS (hull side) (DBW model)
OUTBOARD MOTOR-TO-HULL
4 Outboard motors mounted
No.1 Outboard motor
No.2 Outboard motor
No.3 Outboard motor
No.4 Outboard motor
[1] Terminator (installed at factory)
[2] Dummy connector
[3] Interface cable
[4] Engine drop cable (Multiple)
MAIN STATION
[1]
[4]
From outboard motor
From outboard motor
[1] Dummy connector*
[2] Remote control ECU
[3] Control unit case assembly (main)
[4] DBW trunk cable
[5] Interface cable
*: Terminator (installed at factory) in case of main station only; The dummy connector is included in the second station.
26
[6]
[3]
[7]
[4]
[2]
[8]
[3]
[7]
[4]
[2]
[8]
[3]
[7]
[4]
[2]
[8]
[3]
[7]
[4]
[1]
[5] Engine drop cable (Single)
[6] Female terminator
[7] T-connector
[8] Network cable
To second station
[6]
[4]
[3]
[5]
[2]
[14]
[5]
[7]
[6]
[6] Network cable
[7] Remote control cable (main)
[8] Key switch panel (Multiple)
[9] Start/stop switch panel
[10] All start/stop switch panel
1 Outboard motor mounted
[3]
[1]
[5]
[9]
[8]
[8] Network cable
[9] Branch cable
[10] DBW trunk cable
[8] [9] [9] [10]
[7]
[6]
[13]
[11] Power tilt switch panel
[12] Remote control box
[13] NMEA 2000 display
[14] T-connectors
[6]
[7]
[10]
To main station
To main station
[8]
To main station
[10]
To main station
[11] [11]
[12]