Editing Snmpv3 Users; Configuring The Snmp Traps - Cisco RV215W Administration Manual

Administering Your
Configuring Simple Network Management (SNMP)
STEP 1
STEP 2
STEP 3
Cisco RV215W Wireless-N VPN Firewall Administration Guide
Draft Version 1—Cisco Confidential

Editing SNMPv3 Users

You can configure SNMPv3 parameters for the two default Cisco RV215W user
accounts (Admin and Guest).
To configure SNMPv3 settings:
Choose Administration > SNMP.
Under SNMPv3 User Configuration, configure the following settings:
UserName
Access Privilege
Security Level
Authentication
Algorithm Server
Authentication
Password
Privacy Algorithm
Privacy Password
Click Save.

Configuring the SNMP Traps

The fields in the SNMP Trap Configuration section allow you to configure an
SNMP agent to which the firewall sends trap messages (notifications).
To configure the traps:
Select the account to configure (admin or guest).
Displays the access privileges of the selected user
account.
Choose the SNMPv3 security level:
No Authentication and No Privilege—Doesn't
require any Authentication and Privacy.
Authentication and No Privilege—Submit only
Authentication algorithm and password.
Authentication and Privilege—Submit
Authentication/privacy algorithm and password.
Select the type of authentication algorithm (MD5 or
SHA).
Enter the authentication password.
Choose the type of privacy algorithm (DES or AES).
Enter the privacy password.
7
111