Defining The Maximum Snmp Agent Packet Size - Cisco NCS 6000 Series Configuration Manual

Implementing SNMP
DETAILED STEPS
Command or Action
Step 1
configure
Step 2 snmp-server contact system-contact-string
Example:
RP/0/RP0/CPU0:router(config)# snmp-server contact
Dial System Operator at beeper # 27345
Step 3 snmp-server location system-location
Example:
RP/0/RP0/CPU0:router(config)# snmp-server location
Building 3/Room 214
Step 4 snmp-server chassis-id serial-number
Example:
RP/0/RP0/CPU0:router(config)# snmp-server chassis-id
1234456
Step 5
commit

Defining the Maximum SNMP Agent Packet Size

This task shows how to configure the largest SNMP packet size permitted when the SNMP server is receiving
a request or generating a reply.
The sequence in which you issue the snmp-server commands for this task does not matter.
Note
SUMMARY STEPS
1. configure
2. (Optional)
3. commit
DETAILED STEPS
Command or Action
Step 1 configure
snmp-server packetsize byte-count
System Management Configuration Guide for the Cisco NCS 6000 Series Router, Release 5.0.x
Defining the Maximum SNMP Agent Packet Size
Purpose
(Optional)
Sets the system contact string.
(Optional)
Sets the system location string.
(Optional)
Sets the system serial number.
Purpose
73