Table of Contents
Advertisement
Implementing Multicast Routing on Cisco IOS XR Software
Command or Action
Configuring the mLDP User Interface for Feature Filtering
RPL policy allows the user to selectively enable features for filtering.
Configuring the mLDP User Interface for Feature Filtering - MoFRR
SUMMARY STEPS
1. configure
2. mpls ldp mldp
3. mofrr route-policy mldp_policy
4. end
5. commit
6. Use the show command to verify the configuration: show running-config mpls ldp mldp
DETAILED STEPS
Command or Action
Step 1
configure
Example:
RP/0/RP0/CPU0:router# configure
Step 2
mpls ldp mldp
Example:
RP/0/RP0/CPU0:router(config)#mpls ldp mldp
Step 3
mofrr route-policy mldp_policy
Example:
RP/0/RP0/CPU0:router(config-ldp-mldp)# mofrr
route-policy mldp_policy
Step 4
end
Example:
RP/0/RP0/CPU0:router(config-ldp-mldp)# end
Step 5
commit
Purpose
Enters global configuration mode.
Enters the LDP configuration mode.
Configures the specified feature to the MLDP policy to be
allowed to be selected for filtering.
Cisco IOS XR Multicast Configuration Guide for the Cisco CRS Router, Release 5.2.x
Multipoint Label Distribution Protocol Route Policy Map
Purpose
neighbor 1.1.1.1 route-policy mldp_policy
in
!
55
Advertisement
Table of Contents
