Table of Contents
Advertisement
This manual contains the information necessary in order to guarantee a safety an
correct use of the Ramsey Mercury Free Tilt Sensor system (Control Units with
Probe).
Read this manual before working with the product. For personal and system safety
and for best product performance, make sure you thoroughly understand the contents
before using this product.
The manufacturer has a policy of constantly developing and upgrading its products
and hence may make changes without prior notice.
Who Should Use this Manual?
This manual is a learning resource and reference for specialised technical personnel
concerned with installing, operating or maintaining the probe and control.
Standards Applied and Technical Specifications
The system has been made in compliance with the EC, standards.
The products are supplied complete with all the documentation required by these
standards. The installation, use and maintenance manual is an integral part of this
documentation and contains all the informations needed to ensure the efficent
operation of the system, with particular regard to personnel safety.
The following standards have been referred to the design of the Ramsey Mercury
Free Tilt Sensor system:
CAN/CSA-C22.2
No. 61010-1-04
UL Std. No. 61010-1
EC 93/68
EN 61010 : 2001
EN 61326-1 :2006
xii
About this Manual
Safety Requirements for electrical equipment for Measurement, Control,
and Laboratory: Use- Part 1 General Requirements
Safety Requirements for electrical equipment for Measurement, Control,
and Laboratory: Use- Part 1 General Requirements
Low Voltage Directive
Safety Requirements for Electrical Equipment for Measurement
(EMC)
Advertisement
Table of Contents
