Configuring Virtual Switch Ports; Creating Virtual Switch Ports - Avaya P550R User Manual

Configuring Virtual Switch Ports

Creating Virtual Switch Ports

Avaya P550R/P580/P880/P882 Multiservice Switch ATM Uplink User Guide, Version 2.0.
This chapter explains how to configure RFC 1483 only. For general
configuration information, refer to
Configuring the ATM Uplink Module
configuring LANE, refer to,
* Note: To configure RFC 1483 on a 50 Series module, you must
obtain a license key. If you plan on configuring RFC
1483 and did not have a license key, please contact your
Avaya Sales representative.
This chapter contains the following information:
Configuring Virtual Switch Ports
Configuring ATM Links within Virtual Switch Ports
Managing Permanent Virtual Channels (PVCs)
View PVC Operational Information
View PVC Counters
Configuring Failover and LoadSharing
This section provides information for configuring your virtual switch
ports and contains the following procedures:
Creating Virtual Switch Ports
Modifying Virtual Switch Ports
Creating Static LAFT Entries
Deleting Virtual Switch Ports
To create virtual switch ports:
1. Select Modules & Ports > Configuration from the Web
Agent. The Module Information dialog box opens
(Figure 64).
Configuring RFC 1483
Chapter 2, "Chapter 2
". For information on
Chapter 3 Configuring LANE .
4-5