Table of Contents
Advertisement
Chapter 20
Sample Output
Systems
20-10
Table 20-4. Parameters, Keywords, Arguments
Name
<access-list-name>
[default-action-deny]
The following command enables the access-list fwdrules:
(configure)# ip access-group fwdrules
P550R, P580, P880, and P882.
Command Reference Guide for the Avaya P580 and P882 Multiservice Switches, v6.1
Definition
The name of the access list.
Sets the default action to deny. When this option is
enabled, the switch blocks all traffic that does not match
an access rule in the enabled ACL.
This option is a global setting and is not available in the
Web Agent. If you use the CLI to enable this option and
then use the Web Agent to enable a different ACL, the
default-action-deny option remains enabled.
To disable this option, enter ip access-group <group
name> and omit the [default-action-deny] option. For
<group name>, you can enter:
• The name of the currently enabled access list to
retain its enabled status.
OR
• The name of a different access list to enable it.
Advertisement
Table of Contents
