Set Port Edge Admin State - Avaya 106760804 Command Reference Manual

Chapter 28

set port edge admin state

Command Mode
Description
Syntax
Systems
28-2
Global Configuration.
Specifies whether a port is an edge port or a nonedge port. An edge port is
not connected to any other bridge. Only edge ports and point-to-point links
can rapidly transition to forwarding state.
If you set edge admin state to edge-port, the OperEdgePort field of the
show port command is also set to edge-port. However, if the port receives a
BPDU, the Oper Edge Port setting changes to non-edge-port. (To receive a
BPDU, the port must be connected to a bridge and thus is not an edge port.)
set port edge admin state <mod-swport-range> [...,<mod-swport-range>]
{edge-port | non-edge-port}
Table 28-1. Parameters, Keywords, Arguments
Name
<mod-swport-
range>
edge-port
non-edge port
P580 and P882.
Command Reference Guide for the Avaya P580 and P882 Multiservice Switches, v6.1
Definition
The module and port or port range.
Defines the port as an edge port.
Defines the bridge as a nonedge port.