Set Port Queue Service Cbq - Avaya 106760804 Command Reference Manual

set port queue service cbq

Command Mode
Description
Syntax
Systems
Document No. 10-300090, Issue 1
Global Configuration.
Sets a port, port range, or module to use class-based queuing (CBQ) queue
servicing.
set port queue service {{<mod-num> | <mod-swport-range>}[..., {<mod-
num> | <mod-swport-range>}] | all-ports} cbq queue <queue> bit-rate
<rate>
Table 23-13. Parameters, Keywords, Arguments
Name
<mod-num>
<mod-swport-range>
all-ports
<queue>
<rate>
P550R and P880, 80-series modules only.
P580 and P882.
Definition
The slot number of a module. If you specify <mod-
num>, all ports on the module are set to use CBQ.
The slot number of a module, and, either a port number,
or a range of port numbers having the format Px-Py. For
example:
• To specify port 1 on the module in slot 3, enter 3/
1.
• To specify ports 1 through 5 on the module in slot
3, enter 3/1-5.
If you specify <mod-swport-range>, the port or range
of ports that you specify is set use CBQ.
All ports in the chassis. If you specify all-ports, all
ports on all modules in the chassis are set to use CBQ.
The queue number, which can range from 0 to 7.
The maximum bits per second that you want to assign to
the queue.
If the switch is operating in Fabric mode 1, the rate can
range from 220 Kbps to 1.5 Gbps.
If the switch is operating in Fabric mode 2, the rate can
range from 270 Kbps to 1.5 Gbps
Entering a rate of 0 disables the queue.
80-Series QoS
23-25