Table of Contents
Advertisement
Chapter 1
Mode
Router Configuration
Interface Configuration
Entering and Exiting the Command Modes
Mode
To Access
User
Log in.
Privileged
From the User mode,
enter enable.
Global
From the Privileged
Configuration
mode, enter configure.
Router
From Global mode, enter
Configuration
router <protocol>
(dvmrp, igmp, ospf, rip,
or vrrp).
Interface
From Global mode, enter
Configuration
interface <interface-
name>
1-2
Description
Commands to configure the
routing protocols.
Commands to configure the
interfaces.
See
Table 1-2
for an explanation of how to access and exit the command
modes.
Table 1-2. Entering and Exiting the Command Modes
Prompt Displayed
>
#
(configure)#
For DVMRP, OSPF, and
RIP: (configure
router:<protocol>)#
For IGMP and VRRP:
(configure)#
(configure-
if:<interface-
name>)#
Command Reference Guide for the Avaya P580 and P882 Multiservice Switches, v6.1
To Access
From Global mode, enter
router <protocol>
(dvmrp, igmp, ospf, rip,
or vrrp).
From Global mode, enter
interface <interface-
name>.
To Exit
Enter exit.
Disable or exit returns to the
User mode.
Exit returns to the Privileged
mode.
Exit returns to the Global
Configuration mode.
End returns to the Privileged
mode.
Exit returns to the Global
Configuration mode.
End returns to Privileged
mode.
Prompt
For DVMRP, OSPF,
and RIP: (configure
router:<protocol>)#
For IGMP and VRRP:
(configure)#
(config-if: <interface-
name>)#
2 of 2
Advertisement
Table of Contents
